SPERS gives every solar park entry point a unique registered identifier — the SPERS-ID. When an incident occurs, anyone on site states that code. Responders arrive at the exact correct location. No confusion. No delays. No verbal navigation.
Solar parks are increasingly built in remote or semi-rural locations, clustered near one another, with multiple access points — and no standard identification. When emergency services or security teams are dispatched, the result is confusion, delay, and elevated risk to personnel, equipment, and the public.
Access points concealed within agricultural yards, behind vegetation, or at the end of unmarked tracks — not visible from the public road.
Multiple parks in proximity with similar or identical addresses. A general address does not tell a responder which park — or which entrance.
Large installations with several fields registered as a single location object in alarm systems. Security dispatched to Field A while the incident is at Field B.
Alarm monitoring centres and 112 dispatch centres have no standardised location reference on file. Every incident starts with verbal navigation under pressure.
The result: responders are sent to the wrong location. Minutes are lost. Incidents escalate. Perpetrators escape.
The Netherlands alone has over 500 operational solar parks, with hundreds more under construction. Across Europe, this number exceeds 50,000 installations. As grid-scale solar deployment accelerates under EU energy policy, the absence of a location identification standard becomes an increasingly critical infrastructure gap.
Register your park →Drawn from 1,500+ operational days of direct solar park experience. Site names anonymised. The incidents are factual.
During a security patrol, the SPERS founder — working alone — encountered three active copper thieves removing cables. Police were called via 112. Despite providing the site address, the dispatch centre could not locate the correct entry point. The primary entrance was concealed within a working agricultural contractor's yard. A second entrance existed at the end of an unmarked grass track behind dense vegetation, not visible from the road.
By the time officers arrived, the perpetrators had fled. No arrests were made. Days later, police returned to manually record the access points. When needed at the same location months later, the identical problem recurred.
An incident was reported at a solar park with four adjacent fields (A–D). The PAC dispatched the attending security officer to Field A. The incident was occurring on Field B — immediately adjacent. Upon arrival, the officer could not determine which field to attend: the entire installation was registered in the PAC system as a single location object with one address reference.
Significant time was lost while officer and PAC attempted to resolve the correct field by radio. The unauthorised individuals left the site unobserved during this period.
Two adjacent solar parks. One had a permanent security guard on site. The other was included in a mobile surveillance route operated by a security company — a route that was regularly subcontracted to different officers and third-party firms.
Because the two parks were not clearly identified at their entry points, patrolling officers repeatedly stopped at the wrong site. On multiple occasions, a surveillance officer encountered an unknown person on the premises and called police — not realising the individual was the permanent guard of the neighbouring park. Police were dispatched unnecessarily, time and resources were wasted, and the correct park went unpatrolled during those periods.
The problem recurred frequently precisely because the route was carried out by different people who were unfamiliar with the area. Without clear, standardised identification at each entry point, every new officer made the same mistake.
A large quantity of copper cable was found in front of a solar park. Police suspected it had been taken from the installation, but the site carried no identification — no operator name, no contact details, nothing that indicated who was responsible for it.
Despite their efforts, police were unable to trace the park's responsible parties through official channels. They contacted the SPERS founder directly, who was able to provide the correct contact details for the site. Only then could the owner be notified and action taken.
In each of these cases, a SPERS-ID on the relevant entry point would have provided an immediate, pre-registered, verifiable location reference. The call becomes: "I am at SPERS-DKSOL0051" — and everyone already knows exactly where that is.
To avoid misunderstanding — and because it matters for how you implement it.
SPERS does not detect intrusion, trigger alarms, or monitor sites. It identifies and locates. Your existing alarm infrastructure remains unchanged.
SPERS does not replace existing alarm infrastructure. It works alongside it — ensuring that when an alarm is triggered, responders can actually find the location.
SPERS is an identification layer. Your existing emergency response procedures, evacuation plans, and safety protocols remain fully in force.
SPERS reduces location confusion. It does not guarantee or influence the speed of response by police, security, or other services.
SPERS Foundation does not monitor registered sites or respond to incidents. It maintains the registry and the standard — nothing more.
One standardised identification code per entry point. One physical board. One registry. When something happens — anyone on site states their SPERS-ID. Responders arrive at the right place, first time.
SPERS assigns a unique, registered identifier to every solar park entry point and provides four complementary layers of identification. The system works without internet. It works in all conditions. It works on the first call.
The first 25 solar parks in the Netherlands, 25 in Belgium, and 25 in Luxembourg to register join as official Founding Partners. Registration is completely free — SPERS-ID, digital location page, and all physical boards for your entry points at founding are included at no cost. The 10-year registration fee is permanently waived for all founding entry points. Founding Partners never pay the standard registration fee for their founding entry points.
The only cost that may apply after founding: if you add new entry points or order additional boards for new locations later, those are charged at standard rates. Everything registered at the time of joining — free, forever.
| ⭐ Founding Partner | SPERS Basic | SPERS Complete | |
|---|---|---|---|
| SPERS-ID & Registry | Free — permanently | €100 / entry point / 10 years | €100 / entry point / 10 years |
| Physical Board(s) | Free — included | Not included | €115 one-off / board |
| Digital Location Page | Included | Included | Included |
| 10-yr registration fee | Permanently waived — forever | €100 / entry point / 10 years | €100 / entry point / 10 years |
| Listed on SPERS website | Yes — as Founding Partner | — | — |
|
Programme closes once all 100 spots are filled. New registrations continue at standard rates thereafter. Listed Founding Partners receive permanent public recognition on the SPERS website.
Register as Founding Partner →
|
|||
I'm Gerard Mulder. I started out as a security officer, moved into HSE management, and over the years built up a working knowledge of solar parks that now spans 1,500+ operational days across six countries.
That path — from the ground up — means I have worked every phase of a solar installation: construction, commissioning, day-to-day operations, large-scale maintenance and revision, and decommissioning. My work covers both HSE and physical security, and in practice those two disciplines overlap constantly on solar sites.
On the HSE side I do what the job requires: site inspections, audits, risk assessments (RI&E), incident investigations, toolbox meetings, safety documentation. On the security side: threat analyses, security plans, access control, CCTV and detection systems, perimeter assessment, incident response, and coordination with insurers, permit authorities, and where necessary, law enforcement.
Security companies engage me for my knowledge of solar parks. One example: a private security company asked me to design and implement a complete Mobile Security Patrol programme for a large international solar operator across the Netherlands — including route planning, shift scheduling, HSE documentation, and operational procedures, built from scratch.
Over the years I have seen the same problem on virtually every site I visited — in the Netherlands, Belgium, England, Scotland, Wales, Northern Ireland, and Ireland. When something happened, nobody could find the right entrance. Not police, not security. There was no standard. SPERS is my attempt to fix that — built from what I actually encountered in the field, not from a desk.
The SPERS-ID is issued per entry point — not per park. A park with four fields and two gates per field has eight entry points, and can have eight individual SPERS-IDs. This is intentional: it is precisely the per-entry-point identification that eliminates dispatch errors at multi-field installations.
Prefer to print your own sign? Download the free print template — the €100 / 10 years registry fee still applies. · Portfolio of 10+ parks? Contact us.
Fill in the form and the SPERS Foundation will follow up within one business day with your SPERS-ID and next steps. Founding Partner spots are limited — first come, first served.
Already certain? Mention it in the message and we'll skip straight to registration.
Thank you. The SPERS Foundation will follow up at within one business day. In the meantime, feel free to download the documents below.